China Best Sales Bw1000mm Conveyor Flat Return Idler Roller with Drop Brackets with Hot selling

Product Description

MYC Roller Introduction
* Roller is an important part of the belt conveyor. There are many types of rollers such as carrier roller, impact roller, RDRT roller, return roller and so on. The function of roller is to support the belt, reduce the running resistance of the belt and make the verticality of the belt not exceed a certain limit to ensure the smooth running of the belt.
* Roller accounts for 35% of the total cost of a belt conveyor system and generates more than 70% resistance, so the quality of roller is particularly important.
* CZPT roller adopts self-developed double labyrinth seal structure, which is better than traditional seal structure in waterproof and dustproof effect. Roller pipe adopts high-frequency welding pipe special for rollers, shaft adopts cold drawn bright shaft special for rollers, and bearing housing is made by stamping, drawing and welding with mixed gas. After the roller is welded, both ends are chamfered and polished, and then polish and remove the rust of the pipe surface. The roller surface adopts outdoor powder coating, heating and curing. The roller adopts a double-head pressing machine to press the bearing and the seal in 3 times, so as not to damage the seal and protect the bearing. The shaft end is subjected to the final anti-rust treatment, and finally put into the export-specific crates.
* The CZPT series of rollers have a wide range of products, including steel rollers, impact rollers, RDRT rollers, rubber-coated rollers, self-aligning rollers, oil injection rollers, galvanized rollers and other types. The size specifications can be customized according to the customer’s drawings, also can be produced according to the standards of various countries. For detailed specifications, you can ask us for a product manual.
* At present, CZPT has the most advanced fully automatic production line for rollers in the industry. The entire production process uses robots instead of manual processing and production. Currently we have 2 automatic production lines and 2 semi-automatic production lines, which can achieve a daily output of 2000 rollers. For roller frames, we use a fully automatic laser cutting machine to cut the material, and use a CNC bending machine to produce the parts of the frame. Welding adopts a robot. Surface treatment is shot blasting and hot-galvanizing in accordance with international standards.

MYC Roller Specifications
No. Item Description
1 Brand MYC
2 Roller Diameter 60/63.5/76/89/102/108/114/127/133/140/152/159/178/194/219mm
3 Shell Thickness 3/3.5/4/4.5/5/5.5/6mm
4 Face Length 100mm-4000mm
5 Shaft Diameter 20/25/30/35/40/45/50mm
6 Bearing 6204/6205/6305/6206/6306/6307/6308/6309/6310
7 Bearing Type ZZ C3 / ZRS C3
8 Bearing Brand LYC/SKF/FAG/NSK
9 Seal MY/TK/TKII/TKIII/TF/AR/RG/RD
10 Pipe Material Carbon Steel Q235
11 Shaft Material Cold Drawing Round Steel
12 Surface Treatment Powder Coating/Galvanizing
13 Surface Color Customized

MYC Production Equipment and Capacity
* We have an automated CNC production line designed and manufactured by ourselves. The production line contains the following unique core patented equipment:
Fully automatic extrusion equipment
Fully automatic injection molding equipment
Two-way CNC plastic roll lathe
Two-way milling machine with flat slot
CNC Pipe cutting machine for plastic pipe
* Our automatic production single line processes 50,000 rollers per month and we also have the ability to expand production capacity.
* Our CNC automatic processing equipment can fully guarantee the processing accuracy and quality of the products.
MYC Roller Advantages
* Choose the raw material with the very best quality from the market.
* Use the most advanced automation equipment for production.
* Long-life span, high quality and energy-saving products.
* Over 15 years experience of design, innovation, maintainence and production.
* Certified by ISO 9001, ISO 14001, ISO 45001, SGS, BV and other authorized certifications.
* Good reputation from the customers all over the world with longtime cooperation.

• Products Overview
                                                                                                                                                                                                        

    Roller is divided into carrier roller, impact roller, return roller, RDRT roller, CZPT roller, rubber lagged roller and so on.
    As per the material used, there’re steel roller and plastic roller. Normally plastic roller is divided into HDPE roller, UMHWPE
    roller and nylon roller.

Comparison of Properties of Rollers of Different Materials
No. Item HDPE Roller Steel Roller Ceramic Roller
1 Chemical resistance (strong acid, strong alkali) Yes No Yes
2 Toughness (subject to greater external force) Unbreakable Unbreakable Fragile
3 Bearing Tightness Superior General Poor
4 Surface Adhesion Difficult Easy Easy
5 Coefficient of Sliding Friction (to belt) Small 0.10-0.15 Big 0.68-0.80 Big 0.68-0.80
6 Abrasive Resistance Good General Good
7 Wear on the belt Wearproof Easy to wear Easy to wear
8 Running Power Consumption (take steel roller as 1) 0.85 1 1.05
9 Noise and Vibration Low High Higher
10 Weight 5 10 15
11 Installation Maintenance Easy to install and maintenance-free Heavy installation and maintenance workload Heavy installation and maintenance workload
12 Water Absorption Small Big Big
13 Service Life 3-5 years 1-2 years 1-2 years

 

With good quality and high output, CZPT roller is exported to countries all around the world.

• Company Overview
                                                                                                                                                                                                        
    ZheJiang CZPT Conveyor Co., Ltd, located in the Eurasian bridgehead – HangZhou City Juxian Economic Development Zone, the company occupies more than 300 acres with a production workshop of 13 million square meters. Our company is close to HangZhou Port, HangZhou Port, HangZhou Airport and HangZhou Airport with high-speed around and convenient transportation, providing convenient services for customers with superior geographical advantages.

    Established in 2008, our company is a scientific and technological innovation-oriented enterprise with more than 10 R & D staff and more than 30 technical staff. Our company has independently studied and obtained more than 100 invention patents so far.

    Our company is committed to long distance, large capacity, space turning belt conveyor research and development and manufacturing, the roller, bracket, pulley and steel structure we produced have won praise of domestic and foreign customers. Our current customers are throughout Australia, Canada, the United States, Turkey, Saudi Arabia, Chile, Japan, South Korea, the Netherlands, France, Southeast Asia and other countries and regions.

    Our company attaches great importance to quality control, with high reliability for the design principle, from the source of the product to control the quality, uses advanced technology and equipment. Our company has obtained the “ISO9001: 2008 quality system certification”, “LEVEL III steel structure engineering and mechanical and electrical equipment installation”, “ISO14001: 2015 environmental system certification”, “ISO45001: 2018 CZPT system certification” and ” Production License of dangerous goods packaging and containers”.

     Adhere to the production of first-class products, provide first-class service, adhere to first-class management and create first-class enterprise, our company sincerely looks forward to working with all customers for sincere cooperation and a better future!

• Qualification Certificates
                                                                                                                                                                                                        

 

The importance of pulleys

A pulley is a wheel that rides on an axle or axle. The purpose of the pulley is to change the direction of the tensioning cable. The cable then transfers the power from the shaft to the pulley. This article explains the importance of pulleys and demonstrates several different uses for this machine. Also, see the Mechanical Advantages section below for the different types. let’s start.
pulley

simple machine

A simple pulley machine is a device used to transfer energy. It consists of a wheel with flexible material on the rim and a rope or chain tied to the other end. Then lift the load using the force applied to the other end. The mechanical advantage of this system is one, as the force applied to the load is the same as the force on the pulley shaft.
A simple pulley machine has many benefits, from the ability to build pyramids to building modern buildings with it. Pulleys are also popular with children because they can perform simple tasks such as lifting toys onto a slide, sliding them off the slide, and lifting them up again. These activities, called “transportation” by child development theorists, allow them to learn about the physics of simple machines in the process.
The mechanism works by using cables to transmit force. The cable is attached to 1 side of the pulley and the other side is pulled by the user. Lift the load by pulling on 1 end and the other end of the rope. Simple pulley machines have many commercial and everyday applications, including helping move large objects. They can be fixed or movable, and can be a combination of both. The present invention is a great tool for any beginner or engineer.

axis

The axle wheel is the basic mechanical part that amplifies the force. It may have originally appeared as a tool to lift buckets or heavy objects from a well. Its operation is demonstrated by large and small gears attached to the same shaft. When applied to an object, the force on the large gear F overcomes the force W on the pinion R. The ratio of these 2 forces is called the mechanical advantage.
The ideal mechanical advantage of shaft pulleys is their radius ratio. A large radius will result in a higher mechanical advantage than a small radius. A pulley is a wheel through which a rope or belt runs. Often the wheels are interconnected with cables or belts for added mechanical advantage. The number of support ropes depends on the desired mechanical advantage of the pulley.
In the design of the axle wheel, the axle is the fulcrum and the outer edge is the handle. In simple terms, wheels and axle pulleys are improved versions of levers. The axle pulley moves the load farther than the lever and connects to the load at the center of the axle. Shaft pulleys are versatile and widely used in construction.

rope or belt

Ropes or pulleys are mechanical devices used to move large masses. The rope supports a large mass and can be moved easily by applying a force equal to 1 quarter of the mass to the loose end. Quad pulleys have 4 wheels and provide the mechanical advantage of 4 wheels. It is often used in factories and workshops. It is also a popular choice in the construction industry. If you are installing a pulley in your vehicle, be sure to follow these simple installation instructions.
First, you need to understand the basics of how a rope or pulley works. The machine consists of 1 or more wheels that rotate on an axle. The rope or belt is wrapped around the pulley and the force exerted on the rope is spread around the pulley. It then transfers the force from 1 end of the rope to the other. The pulley system also helps reduce the force required to lift objects.
Another common rope or pulley is the differential pulley. This is similar to a rope pulley, but consists of 2 pulleys of different radii. The tension in the 2 halves of the rope supports half the load that the live pulley should carry. These 2 different types of pulleys are often used together in composite pulley systems.
pulley

Mechanical advantage

The mechanical advantage is the ratio of the force used to move the load through the pulley system to the force applied. It has been used to measure the effectiveness of pulley systems, but it also requires assumptions about applied forces and weights. In a simple 1:1 pulley system, the weight lifting the weight is the same as the weight of the person pulling the weight. Adding mechanical advantage can help make up for the lack of manpower.
This advantage stems from the mechanical properties of simple machines. It requires less force and takes up less space and time to accomplish the same task. The same effect can also be achieved by applying less force at a distance. Furthermore, this effect is called the output force ratio. The basic working principle of a pulley system is a rope with a fixed point at 1 end. The movable pulley can be moved with very little force to achieve the desired effect.
The load can be moved through the vertical entry using a simple pulley system. It can use a simple “pulley block” system with a 2:1 “ladder frame” or a 4:1 with dual pulleys. This can be combined with another simple pulley system to create a compound pulley system. In this case, a simple pulley system is pulling another pulley, giving it a 9:1 mechanical advantage.

Commonly used

You’ve probably seen pulley systems in your kitchen or laundry room. You probably already use it to hang clothes on an adjustable clothesline. You may have seen motor pulleys in the kitchens of commercial buildings. You might even have seen 1 on a crane. These machines use a pulley system to help them lift heavy loads. The same goes for theaters. Some pulleys are attached to the sides of the stage, enabling the operator to move up and down the stage.
Pulley systems have many uses in the oil and petroleum industry. For example, in the oil and gas industry, pulley systems are used to lay cables. They are arranged in a pulley structure to provide mechanical energy. When the rope is running, 2 pulleys are hung on the derrick to facilitate smooth running. In these applications, pulleys are very effective in lifting heavy objects.
A pulley is a simple mechanical device that converts mechanical energy into motion. Unlike chains, pulleys are designed to transfer power from 1 location to another. The force required to lift an object with a pulley is the same as that required by hand. It takes the same amount of force to lift a bucket of water, but it’s more comfortable to pull sideways. A bucket of water weighs the same as when lifted vertically, so it’s easy to see how this mechanism can be useful.
pulley

Safety Notice

When using pulleys, you should take several safety precautions to keep your employees and other workers on the job site safe. In addition to wearing a hard hat, you should also wear gloves to protect your hands. Using pulleys can lead to a variety of injuries, so it’s important to keep these precautions in mind before using pulleys. Here are some of the most common:
Pulleys are an important piece of equipment to have on hand when lifting heavy objects. Pulleys not only reduce the force required to lift an object, but also the direction of the force. This is especially important if you are lifting heavy objects, such as a lawn mower or motorcycle. Before starting, it is important to make sure that the anchoring system can support the full weight of the object you are lifting.
When using a pulley system, make sure the anchor points are adequate to support the load. Check with the pulley manufacturer to determine the weight it can safely lift. If the load is too large, composite pulleys can be used instead. For vertical lifts, you should use a sprocket set and wear personal protective equipment. Safety precautions when using pulleys are critical to worker health and safety.

China Best Sales Bw1000mm Conveyor Flat Return Idler Roller with Drop Brackets   with Hot sellingChina Best Sales Bw1000mm Conveyor Flat Return Idler Roller with Drop Brackets   with Hot selling