China Custom Conveyor Steel Return Roller with ERW Pipe wholesaler

Product Description

MYC Roller Introduction
* Roller is an important part of the belt conveyor. There are many types of rollers such as carrier roller, impact roller, RDRT roller, return roller and so on. The function of roller is to support the belt, reduce the running resistance of the belt and make the verticality of the belt not exceed a certain limit to ensure the smooth running of the belt.
* Roller accounts for 35% of the total cost of a belt conveyor system and generates more than 70% resistance, so the quality of roller is particularly important.
* CZPT roller adopts self-developed double labyrinth seal structure, which is better than traditional seal structure in waterproof and dustproof effect. Roller pipe adopts high-frequency welding pipe special for rollers, shaft adopts cold drawn bright shaft special for rollers, and bearing housing is made by stamping, drawing and welding with mixed gas. After the roller is welded, both ends are chamfered and polished, and then polish and remove the rust of the pipe surface. The roller surface adopts outdoor powder coating, heating and curing. The roller adopts a double-head pressing machine to press the bearing and the seal in 3 times, so as not to damage the seal and protect the bearing. The shaft end is subjected to the final anti-rust treatment, and finally put into the export-specific crates.
* The CZPT series of rollers have a wide range of products, including steel rollers, impact rollers, RDRT rollers, rubber-coated rollers, self-aligning rollers, oil injection rollers, galvanized rollers and other types. The size specifications can be customized according to the customer’s drawings, also can be produced according to the standards of various countries. For detailed specifications, you can ask us for a product manual.
* At present, CZPT has the most advanced fully automatic production line for rollers in the industry. The entire production process uses robots instead of manual processing and production. Currently we have 2 automatic production lines and 2 semi-automatic production lines, which can achieve a daily output of 2000 rollers. For roller frames, we use a fully automatic laser cutting machine to cut the material, and use a CNC bending machine to produce the parts of the frame. Welding adopts a robot. Surface treatment is shot blasting and hot-galvanizing in accordance with international standards.

MYC Roller Specifications
No. Item Description
1 Brand MYC
2 Roller Diameter 60/63.5/76/89/102/108/114/127/133/140/152/159/178/194/219mm
3 Shell Thickness 3/3.5/4/4.5/5/5.5/6mm
4 Face Length 100mm-4000mm
5 Shaft Diameter 20/25/30/35/40/45/50mm
6 Bearing 6204/6205/6305/6206/6306/6307/6308/6309/6310
7 Bearing Type ZZ C3 / ZRS C3
8 Bearing Brand LYC/SKF/FAG/NSK
9 Seal MY/TK/TKII/TKIII/TF/AR/RG/RD
10 Pipe Material Carbon Steel Q235
11 Shaft Material Cold Drawing Round Steel
12 Surface Treatment Powder Coating/Galvanizing
13 Surface Color Customized

MYC Production Equipment and Capacity
* We have an automated CNC production line designed and manufactured by ourselves. The production line contains the following unique core patented equipment:
Fully automatic extrusion equipment
Fully automatic injection molding equipment
Two-way CNC plastic roll lathe
Two-way milling machine with flat slot
CNC Pipe cutting machine for plastic pipe
* Our automatic production single line processes 50,000 rollers per month and we also have the ability to expand production capacity.
* Our CNC automatic processing equipment can fully guarantee the processing accuracy and quality of the products.
MYC Roller Advantages
* Choose the raw material with the very best quality from the market.
* Use the most advanced automation equipment for production.
* Long-life span, high quality and energy-saving products.
* Over 15 years experience of design, innovation, maintainence and production.
* Certified by ISO 9001, ISO 14001, ISO 45001, SGS, BV and other authorized certifications.
* Good reputation from the customers all over the world with longtime cooperation.

• Products Overview
                                                                                                                                                                                                        

    Roller is divided into carrier roller, impact roller, return roller, RDRT roller, CZPT roller, rubber lagged roller and so on.
    As per the material used, there’re steel roller and plastic roller. Normally plastic roller is divided into HDPE roller, UMHWPE
    roller and nylon roller.

Comparison of Properties of Rollers of Different Materials
No. Item HDPE Roller Steel Roller Ceramic Roller
1 Chemical resistance (strong acid, strong alkali) Yes No Yes
2 Toughness (subject to greater external force) Unbreakable Unbreakable Fragile
3 Bearing Tightness Superior General Poor
4 Surface Adhesion Difficult Easy Easy
5 Coefficient of Sliding Friction (to belt) Small 0.10-0.15 Big 0.68-0.80 Big 0.68-0.80
6 Abrasive Resistance Good General Good
7 Wear on the belt Wearproof Easy to wear Easy to wear
8 Running Power Consumption (take steel roller as 1) 0.85 1 1.05
9 Noise and Vibration Low High Higher
10 Weight 5 10 15
11 Installation Maintenance Easy to install and maintenance-free Heavy installation and maintenance workload Heavy installation and maintenance workload
12 Water Absorption Small Big Big
13 Service Life 3-5 years 1-2 years 1-2 years

 

With good quality and high output, CZPT roller is exported to countries all around the world.

• Company Overview
                                                                                                                                                                                                        
    ZheJiang CZPT Conveyor Co., Ltd, located in the Eurasian bridgehead – HangZhou City Juxian Economic Development Zone, the company occupies more than 300 acres with a production workshop of 13 million square meters. Our company is close to HangZhou Port, HangZhou Port, HangZhou Airport and HangZhou Airport with high-speed around and convenient transportation, providing convenient services for customers with superior geographical advantages.

    Established in 2008, our company is a scientific and technological innovation-oriented enterprise with more than 10 R & D staff and more than 30 technical staff. Our company has independently studied and obtained more than 100 invention patents so far.

    Our company is committed to long distance, large capacity, space turning belt conveyor research and development and manufacturing, the roller, bracket, pulley and steel structure we produced have won praise of domestic and foreign customers. Our current customers are throughout Australia, Canada, the United States, Turkey, Saudi Arabia, Chile, Japan, South Korea, the Netherlands, France, Southeast Asia and other countries and regions.

    Our company attaches great importance to quality control, with high reliability for the design principle, from the source of the product to control the quality, uses advanced technology and equipment. Our company has obtained the “ISO9001: 2008 quality system certification”, “LEVEL III steel structure engineering and mechanical and electrical equipment installation”, “ISO14001: 2015 environmental system certification”, “ISO45001: 2018 CZPT system certification” and ” Production License of dangerous goods packaging and containers”.

     Adhere to the production of first-class products, provide first-class service, adhere to first-class management and create first-class enterprise, our company sincerely looks forward to working with all customers for sincere cooperation and a better future!

• Qualification Certificates
                                                                                                                                                                                                        

How to Assemble a Pulley System

A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
pulley

Simple pulley

The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the 2 wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The 2 pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It’s very useful and can be a great addition to your child’s science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to 1 end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use 2 or more wheels to transmit force. Compound pulleys have 2 or more wheels and can lift heavier objects. Dim is POLE2.
pulley

tapered pulley

It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across 4 steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company’s website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley

pulley pulley system

A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the 2 wires. The other pulley reverses the direction of the force, but that doesn’t add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope 4 times reduces the force required to lift 1 foot. Likewise, if the pulley system had 4 pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is 3 times the length of the rope, it will be more than 3 times the required length.

China Custom Conveyor Steel Return Roller with ERW Pipe   wholesaler China Custom Conveyor Steel Return Roller with ERW Pipe   wholesaler